You can now own a piece of history – USFA® and SASS have teamed together to bring you the World famous single action revolver.
Each USFA/SASS Single Action Revolver will be built to your specifications and features an Old Armory Bone Case™ and Dome Blue™ finish, Old Armory Bone Case™ Hammer, black hard rubber checkered grips, Cross-Pin frame, Square Notch Rear sight, and Square Front Blade sight. Also each is marked with a special roll engraved SASS name and SASS Marshal into the left side. Choose from three calibers - .45 Colt, 44-40, and 38 Special. Three barrel lengths - 4-¾", 5-½", 7-½" - with ejector.
A wide choice of grips are available. “US” Black Hard Rubber Checkered grips standard. Other grips available are the “US Ivory” (faux ivory) Smooth Grips, White Hard Rubber Checkered Grips, and two piece Walnut Grips.
You may also have your SASS Alias or SASS Number “Hand Engraved” on the Back Strap, to further personalize your revolver.
The USFA/SASS Single Action Revolver is also available in a Factory “B” engraving with the SASS Marshal engraved on the shovel of the grip. (The special roll engraved SASS name and SASS Marshal into the left side is deleted when ordering the Factory “B” Engraving.)
All USFA/SASS Single Action Revolvers are available only through SASS and are shipped and warranted through Long Hunter Shooting Supply, official licensed dealer of USFA products.
Long Hunter Shooting Supply also offers an action work package so you are assured your revolver is “Match Ready” as soon as you receive it.
The Long Hunter Action Work includes the following:
Long Hunter Custom Action Work |
| 1. |
Rear sights widened from .108 inch to .140 inch |
| 2. |
Forcing cone cut to 11 degrees |
| 3. |
Comes with a crisp, no creep trigger pull |
| 4. |
Replace factory flat “hand” spring. The frame is drilled and a Ruger style coil spring is installed for reliability. |
| 5. |
Factory main spring is replaced with a Lee's Gunslinger flat spring for a smooth, reliable cocking motion while maintaining a quick hammer drop |
| 6. |
Factory flat “trigger/bolt” spring is replaced with a wire spring for added strength. |
For more details or questions about the action work please contact Long Hunter Shooting Supply at 806-365-0093 or at www.longhunt.com
Current Pricing |
USFA/SASS Single Action Revolver
With Old Armory Bone Case™ and Dome Blue™ finish, Old Armory Bone Case™ hammer, black hard rubber checkered grips, Cross-Pin frame, Square Notch Rear sights, and Square front blade sights. Also each is marked with a special roll engraved SASS name and SASS Marshal into the left side. |
|
$875.00 |
| |
|
|
| Exchange Standard Hammer for Low Profile Hammer. |
|
$25.00 |
| |
|
|
| Choice of Barrel Length 4-¾", 5-½", 7-½" |
|
N/C |
| Choice of Caliber .45 Colt, 44-40, 38 Special |
|
N/C |
| |
|
|
| Add Factory "B" Engraving (The special roll engraved SASS name and SASS Marshal into the left side is deleted when ordering the Factory "B" Engraving.) |
|
$795.00 |
| |
|
|
| With "US Ivory" (faux Ivory) Smooth Grips |
|
$75.00 |
| With White Hard Rubber Checkered Grips |
|
$50.00 |
| With Two Piece Walnut Grips |
|
$195.00 |
| |
|
|
| Alias or SASS# Hand Engraved on Back Strap - Up to 10 letters. |
|
$150.00 |
| Alias or SASS# Hand Engraved on Back Strap - Up to 20 letters |
|
$225.00 |
| |
|
|
| Long Hunter Action Work (See details above.) |
|
$175.00 |
| |
|
|
| Shipping on 1st revolver |
|
$50.00 |
| Shipping each additional revolver (Same order.) |
|
$10.00 |
 To order today or for more information
|
